Backlight Behavior

Summary

This page contains backlight behaviors supported by ZMK.

Backlight Action Defines

Backlight actions defines are provided through the dt-bindings/zmk/backlight.h header, which is added at the top of the keymap file:

#include <dt-bindings/zmk/backlight.h>

This will allow you to reference the actions defined in this header such as BL_TOG.

Here is a table describing the action for each define:

Define	Action
BL_ON	Turn on backlight
BL_OFF	Turn off backlight
BL_TOG	Toggle backlight on and off
BL_INC	Increase brightness
BL_DEC	Decrease brightness
BL_CYCLE	Cycle brightness
BL_SET	Set a specific brightness

Behavior Binding

• Reference: &bl
• Parameter #1: The backlight action define, e.g. BL_TOG or BL_INC
• Parameter #2: Only applies to BL_SETand is the brightness value

Backlight settings persistence

The backlight settings that are changed via the &bl behavior will be saved to flash storage and hence persist across restarts and firmware flashes. They will also override the start values set by CONFIG_ZMK_BACKLIGHT_*_START settings. However the settings will only be saved after CONFIG_ZMK_SETTINGS_SAVE_DEBOUNCE milliseconds in order to reduce potential wear on the flash memory.

Examples

1. Toggle backlight on/off

   &bl BL_TOG

2. Sets a specific brightness

   &bl BL_SET 50

Split Keyboards

Backlight behaviors are global: This means that when triggered, they affect both the central and peripheral side of split keyboards.